NUX NDO-6 Queen of Tone｜Dual Overdrive in a Stompbox

Queen of Tone is a dual overdrive pedal that combines Horseman and Morning Star.

HM/MS mode

To the left of the Queen of Tone is the Horseman (HM) in “Silver” mode.
Horseman is based on the legendary Centaur effector.
You can also enter Silver Horse mode by pressing the foot switch.
Sculpt your tone by adjusting the Output, Treble, and Gain knobs.
The Golden Horse mode mainly simulates the sound of the classic Golden Horse effector.
The Silver Horse mode expands the tone of the Silver Horse effects pedal and has a wide gain range.

On the right side of the pedal is the Morning Star (MS) with the "SHINE" mode on.
Morning Star is based on the legendary Bluesbreaker circuit: an extremely transparent, low-gain overdrive.
A long press of the footswitch also activates the signature Shine mode for a clear, treble-enhanced tone.

Using the routing switch, you can easily adjust the order of MS->HM or HM->MS.
You can also use the BF/TB switch to select buffer bypass or true bypass.
And enable IFS via the IFS/NORMAL switch - increasing the input signal,
In order to reach the distortion edge of the speaker, the tube speaker can obtain more harmonics.

control Panel

Left side (Horseman):
OUTPUT knob: output level adjustment
TREBLE knob: high frequency adjustment
GAIN knob: gain adjustment
Horseman foot switch: connect/disconnect the circuit; long press for 1 second to turn on/off Silver mode
Silver indicator light: When using Silver mode, the indicator light will light up

Right (Morning Star):
DRIVE knob: gain adjustment
TONE knob: tone adjustment
LEVEL knob: volume adjustment
Morning Star foot switch: connect/disconnect the circuit; long press for 1 second to turn on/off SHINE mode
Shine indicator light: When using Shine mode, the indicator light will light up

Rounting selector switch: Adjust the order of Morning Star and Horseman

Input/Output Interface

INPUT: Connect guitar
OUTPUT: Connect the output signal to the speaker
EXT. SW: Use an external foot controller (such as NUX NMP-2) to control the pedal
BF/TB shift switch:
BF stands for buffered bypass and TB stands for true bypass.
When several pedals are connected in a tone chain, selecting BF can solve the problem of sound quality loss.
IFS/NORMAL shift switch:
When switched to the IFS position, enabling IFS increases the input signal.
To reach the distortion edge of the speaker, the tube speaker can get more harmonics

Specification

Size: 105(L)X115(W)X58(H) mm
- Weight: 440 g
Input impedance: 2.2Ω
Output impedance: 1 kΩ
Power supply: 9V DC power supply, positive outside and negative inside, optional NUX ACD-006A
Required current: less than 100mA (52mA)

＊＊Original licensed product＊＊

Remark

1. All our products are guaranteed to be replaced within 7 days if there is any quality problem.
   Customers must bring their receipts to our repair center within 7 days of receiving the goods. Please make an appointment.
   (Only for products of the same price and brand)
2. Man-made damage is not covered by warranty
3. This product comes with a 1-year limited warranty
4. The goods will not be returned or exchanged after shipment. The company reserves the right of final decision
5. Delivery to your door in about 10-14 days after ordering, or from Hong Kong, Kowloon and New TerritoriesDesignated stores Pick up
   (The actual delivery date is subject to current transportation arrangements, shipping schedule, etc.
   There is a chance of early or delayed delivery, and the delivery period will not exceed 30 days)
   
6. Free delivery area: Kowloon urban area, Hong Kong Island urban area, New Territories urban area
7. Additional charges for remote areas or outlying islands such as Lantau Island